So, guys, this is our hard case for the DJI Mavic Fly More Kit and it's based on the Nanuk 915 Hard Case.
It's a tad bigger than the 910 which is the other case for the Mavic Air also, but this one fits more batteries. It's for the Fly More.
The case is much larger, thicker and it is bigger also in the surface. So you have a thicker handle here in the front and power claw latches as you know like the push and pull system,
They won't snap your fingers and they stay out of your way when you open them up.
This is the olive color, by the way, so you don't see that often but its nice in the interior.
So inside you have the polyethylene hard foam which is molded exactly for the Mavic air and its components.
You have the space for an iPhone 7 plus or 8. You have the space for the remote that fits right in there. You have the space for the Mavic air. And you have some extra space for three batteries so four inside the Mavic.
You have some space here for the prop guard that goes on the side and also the charger.
So you see the quality of that foam inside the 915 for the Mavic air here is really high quality.
It goes all the way around. It also is removable so if you wanna remove this foam, it is not glued inside. As you can see, you just pull it out, and then you can use this case for other purposes.
You could get a padded divider or cubed foams also. For your cameras and gears, we sell the foams and we sell the padded dividers separately if you want to.
This case is totally waterproof, IP67 rated. You can drop this in the water and leave it there for a few hours and no water is gonna come inside. It comes in multiple colors.
You can check on hardcases.ca for other colors and if you have any questions, you may email me email@example.com.
Thank you very much, guys!